Paired Devices; Making A Home Call Using Your Landline; Making A Cellular Call Using Your Cordless Dect Handset - Motorola L701BT Manual Del Usuario

3.2.3

Paired devices

The cellular(s) paired up will be displayed in the paired devices list, no matter whether it(they)
is(are) connected or not. You can choose to connect, or remove the cellular from this menu.
1. Press MENU and then VOL+ or REDIAL/VOL- to select BLUETOOTH.
2. Press MENU and then VOL+ or REDIAL/VOL- to select
3. Press MENU and then display will show the Cellular name(s) of paired device(s).
NOTE
Display will show NO PAIRED DEVICE
4. Press VOL+ or REDIAL/VOL- to select the desired cellular device.
For the connected cellular device:
5. Press MENU to remove the cellular device. Display will show
6. Press MENU to confirm.
For the cellular device that is not connected:
5. Press MENU and then VOL+ or REDIAL/VOL- to select
6. Press MENU to confirm. If you select
NOTE
• When the connected cellular is removed, the corresponding
• When the disconnected cellular is connected, the corresponding
• When the cellular is removed, the device name will be removed and
displayed instead in the paired devices list.
3.3

Making a home call using your landline

1. Enter the phone number and press
number.
3.4

Making a cellular call using your cordless DECT handset

If there is only one Bluetooth enabled mobile phone paired up and connected,
1. Enter the phone number, and then press
If there are two Bluetooth enabled mobile phones paired up and connected,
1. Enter the phone number, press
the desired cellular device.
2. Press MENU or
NOTE
If the cellular device is paired up but not connected, you should connect the cellular device
before making an external cellular call.
16
if there is no device paired up.
REMOVE
/HOME or
/CELL and then VOL+ or REDIAL/VOL- to select
/CELL to dial out.
PAIRED LIST.
REMOVE THE
CONNECT or
CELLULAR, press MENU again to confirm.
or
/SPEAKER to dial the phone
/CELL to dial out.
USING THE PHONE
CELLULAR?.
REMOVE CELLULAR.
will be off.
or will be on.
EMPTY will be