Connecting Other Devices - Philips PH0900 Manual De Utilización

EN
8

Connecting Other Devices

Connecting Other Devices
Satellite Receiver
Follow these steps to connect a satellite receiver to the Philips
Wireless Phone Jack extension unit:
1. Locate an existing electrical outlet near the satellite receiver.
2. Plug the extension unit into the electrical outlet.
3. Plug one end of a phone cord into the single phone jack on
the right side of the extension unit.
4. Plug the other end of a phone cord into the phone jack on
the back of the satellite receiver.
5. Look for a green indicator light on the front of the exten-
sion unit. If indicator light remains red, refer to the
Troubleshooting section.
Telephone
Follow these steps to connect a telephone to the Philips
Wireless Phone Jack extension unit:
1. Locate an existing electrical outlet near the prospective
location for your phone.
2. Plug the extension unit into the electrical outlet.
3. Plug the cord from your phone into the single phone jack
on the extension unit.
4. Look for a green indicator light on the front of the exten-
sion unit. If the indicator light remains red, refer to the
Troubleshooting section.
5. Pick up the phone's handset and listen for a dial tone. If
there is no dial tone, refer to the Troubleshooting section.
Fax Machine
Follow these steps to connect a fax machine to the Philips
Wireless Phone Jack extension unit:
1. Locate an existing electrical outlet near your fax machine.
2. Plug the extension unit into the electrical outlet.
3. Plug one end of a phone cord into the single phone jack on
the right side of the extension unit.
4. Plug the other end of a phone cord into the phone jack on
the fax machine.
5. Look for a green indicator light on the front of the extension
unit. If the indicator light remains red, refer to the
Troubleshooting section.
6. Check for a dial tone. If there is no dial tone, refer to the