Setting Up The Handset - Philips Onis 200 Manual De Instrucciones

2uk onis suppl 19/07/01

Setting up the handset

Installing the handset
Proceed as follows:
• Plug the mains adapter into an easily-accessible socket.
• Place the HANDSET on the CHARGER.
Before initial use or following a long period without charging, the HANDSET
should be fully charged for at least 12 hours.
L
WARNING:
Once the handset is fully charged, you should follow the procedure described on page 5
(registering the handset with a base station).
Inserting and replacing batteries
R03/AAA NiMh rechargeable batteries should be used as replacements.
• Slide open the HANDSET battery cover in the direction indicated by the
arrow.
• Remove batteries.
• Insert new batteries as indicated and replace the cover.
• Place the HANDSET on the BASE STATION. Charge for at least 12 hours.
L
WARNING:
Never use non-rechargeable batteries. Use only the recommended types (R03/AAA NiMh).
NOTE. Used batteries should not be disposed of with household waste.
Return used batteries to your distributor or take to a suitable collection centre.
Changing the handset language
On the idle screen, scroll through the list of menus and select |SETTINGS.
1
Scroll to "Handset settings".
2
Select OK|.
3
Choose OK| to select the "Language" option.
4
Scroll to the language you want and select OK|.
5
Press and hold the
6
11:15 Page 4
key to return to the idle screen.
Additional Onis 200 handset
4