Motorola T805 Manual Del Usuario página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 46
Secure phone and Bluetooth GPS receiver
See figure  on page .
Secure phone in car
You can safely secure your phone in your car using the universal phone holder included with your navigation
system. With the universal phone holder, you have three options for securing your phone. Each option is
described below along with detailed illustrations to the right.
To secure your phone to the dashboard using the phone holder and extension arm, first place the four
legs into the slots on the holder and slide down to lock into place as shown by (A). Then, affix the enclosed
circular disc to your dash or center console and attach the suction cup on the extension arm to the disc
(push down on lever) as shown by (B). Place your phone in the phone holder and squeeze the sides together.
To release your phone from the holder, push button on the left side.
To secure your phone to the windshield using the phone holder and extension arm, first place the four legs
into the slots on the holder and slide down to lock into place as shown by (A). Then, attach the suction cup
on the extension arm to the windshield (push down on lever) as shown by (C). Place your phone in the phone
holder and squeeze the sides together. To release your phone from the holder, push button on the left side.
To secure your phone to the front of the dashboard using only the phone holder, first affix the enclosed
adhesive or VELCRO
as shown by (D). Then, firmly attach the phone holder to dashboard using the VELCRO strips. Place your
phone in the phone holder and squeeze the sides together. To release your phone from the holder, push
button on the left side.
Tips for using the universal phone holder to secure your phone in your car:
If the sides of the phone holder block buttons on the side of your phone, remove the L–shaped legs and insert
into the groove on the opposite side of the phone holder.
To help keep the L–shaped legs in place, insert the enclosed rubber strip into the groove on either side of the
feet.
If your phone is wide, insert one side of the phone first, then gently press the other side into place so that the
foam pads are not damaged.
To minimize vibration when using the extension arm, rest the base of the phone holder on your dashboard.
If needed, an extra set of foam pads are included for the phone holder.
Secure GPS receiver
You can safely secure your Bluetooth GPS receiver on the dashboard in your car or onto your belt*.
To secure your GPS receiver to the dashboard in your car, first affix adhesive, VELCRO, or rubber pad onto
bottom of holder, then slide GPS receiver onto other side holder as shown by (E). Once assembled, secure
the GPS receiver by affixing the adhesive or VELCRO on the bottom of the holder to your dashboard (or if you
used the rubber pad, place on the dashboard).
To secure your GPS receiver onto your belt, insert the GPS receiver into the belt clip holder following
numbered steps as shown by (F). Once the GPS receiver is inside the belt clip holder, use belt clip to place
onto your belt.
* Belt holder not available in all regions.
strips to both the phone holder and the desired location on the front of the dashboard
®
English
5

Publicidad

Tabla de contenido
loading

Tabla de contenido