Automatic Search - GBS Jolly Line universal air 4000 easy Instrucciones

1. Remote control preparation
- Insert 2 batteries (AAA type) taking care to respect the polarity
indicated.
2. Remote control programming
2.1 Find Brand
- Find the code(s) corresponding to the brand in the code table (e.g.:
- Insert the code(s) found by direct input
2.1.1 Direct input
SELECT
- Press the
Check that the remote functions correctly, if the device does not
respond correctly, insert the next code for that brand (2.1.1)
an Automatic search (2.2)
N.B.: Press the SELECT key to select the next code

2.2 Automatic search

- Pointing the remote control towards the conditioner, press the SELECT
key until the model code starts incrementing (circa 5 sec.)
- Release the SELECT key but continue pointing the remote control.
- When the conditioner turns on press any key to stop the search.
- Check that the remote control functions correctly, if the device
does not respond correctly, proceed with the Automatic search (2.2)
3. Clock setting
- Press the
4. Programming the Timer OFF function
To work in TIMER mode the remote control must remain oriented
towards the conditioner at a suitable distance
desired.
INSTRUCTIONS
and/or keys until the correct code is displayed.


and/or keys until the correct time is displayed.
UK