Publicidad
Idiomas disponibles
Idiomas disponibles
Tape Head Cleaning
For continued high performance from Retro Rocker, periodically clean the head, pinch roller, and
capstan every 10-20 hours of operation.
To clean the tape deck:
1.
Power off Retro Rocker.
2.
Press the Stop/Eject button to open the cassette holder.
3.
Remove any tape in the deck.
4.
Moisten a new cotton swab with isopropyl alcohol (70-80%).
5.
Carefully rub the face of each head, pinch roller, and capstan with the moistened cotton swab.
6.
Let the cassette holder dry for 5-10 minutes before putting a tape back in it.
Pairing a Bluetooth Device
1.
Adjust the Function switch on Retro Rocker to the BT/USB/SD position.
Note: If an SD card and/or a USB flash drive is inserted, remove these in order to pair to a
Bluetooth device.
2.
Turn on your Bluetooth device.
3.
Navigate to your Bluetooth device's setup screen, find Retro Rocker and connect. A voice
prompt will be heard saying "Bluetooth pairing" when pairing and "Bluetooth connected" when
connected to your Bluetooth device.
Note: If your Bluetooth device prompts for a pairing code, enter "0000".
4.
Press and hold the Play/Pause button to disconnect from a paired Bluetooth device. A voice
prompt will be heard saying "Bluetooth disconnected" when disconnected from the Bluetooth
device.
9
Publicidad
