Control Panel Warning Messages - Hiti CS-200e Manual De Instrucciones

4.1.2 Control panel warning messages

PMessages Displayed
Cover Open Top cover door is opened
Flipper Cover Open Flipper cover door is opened
IC Chip Missing Ribbon IC chip is not inserted
Ribbon Missing Ribbon is not installed
Installed ribbon does not match with ribbon IC
Ribbon Mismatch
chip ID
Ribbon Type Error Unsupported ribbon type
Failing to searching ribbon
Ribbon Out
End of ribbon usage
Print Fail Fail to start printing process
Card runs out
Card Out Inconsistency between card thickness adjustor and card used
Adsorption force among cards
Card Jam Jammed during operation
Cam Error Internal mechanical cam platen error
Flipper Error Flipper unable to perform its duty
Ribbon Chip IC Error Ribbon's IC chip error
Description
Close the top cover door.
Close the flipper cover door.
Install ribbon IC chip into printer's IC chip socket.
Install ribbon with corresponded IC chip into printer.
Check ribbon type and install the corresponded IC chip.
Check ribbon's region code with matching printer's
region code.
Reinstall the ribbon again with correct installation procedure.
Reinstall a new ribbon with IC chip.
Check the ribbon to see if it's snapped.
Place more cards with card's weight module.
Get the setting of adjustor and card used consistent
Move cards apart and then arrange them to input hopper for retry
Follow the LCM screen for releasing card jam instructions.
Contact your local service center for professional advice.
Contact your local service center for professional advice.
Reinsert IC chip again or change a new IC chip if it's required.
19
HiTi CS-200e & CS-220e user manual
Solutions