Functional Description; Technical Specifications - Bosch FAA-500-BB Guia De Instalacion

6 en

Functional Description

The FAA-500-BB Ceiling Mount Back Box is necessary for flush
ceiling installation in false ceilings when mounting 500 and 520
Series Bases and Fire Detectors.
NOTICE!
Observe the planning notes in the Product Information for the
detector series (available for download as PDF file at
www.boschsecurity.com).
Installation
See Figure 2, Page 4.
1 Alignment mark
2 Bracket
1.
2.
3.
4.
5.

Technical Specifications

Maximum thickness of the false ceiling
Mounting height
Required bore hole
Minimum distance to lamps
Max. cable diameter
Dimensions
Housing material
Housing color
Weight (without/with packaging)
F.01U.000.618 | 4.0 | 2011.04
Bore a 130 mm diameter opening (tolerance -1 mm to
+5 mm ) in the ceiling.
Insert the wires through the plugs in the box (4).
Insert the ceiling mount back box from the ceiling opening
from below.
On the front end ring of the back box is a pressed-in
triangular mark (1). Turn the back boxes to align the marks
in one direction. This allows parallel alignment of the
detectors oblong, middle windows for a harmonious total
optical impression.
Tighten the three bracket screws (2).
It is recommended that for usual, soft false ceilings, you do
not use a cordless screwdriver.
3 Base mounting
4 Grommet
32 mm
11 cm
Ø 130 mm (-1 mm to +5 mm)
0.5 m
1.4 cm
Ø 140 x 104 mm
Polycarbonat
White
100 g/200 g
Bosch Sicherheitssysteme GmbH
FAA-500-BB