THOMSON SB100BT Modo De Empleo página 16

Ocultar thumbs Ver también para SB100BT:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 20
Using the USB input
1. Plug your USB flash drive to the USB socket.
2. Press SOURCE button to select USB mode, the unit can play automatically.
3. press the
/
4. Press the VOL+/VOL– to adjust the volume.
Remarks:
• USB port is easy to sensitive equipment, will cause the equipment work is not stable.
Bluetooth Mode
A. Pairing with a Bluetooth cell phone
Please make sure your cell phone is Bluetooth-enabled. Specific pairing steps may vary with different
cell phones. Please refer to the user manual of your cell phone for further information. The general
pairing steps are as follows:
1. Keep SB100BT/SB200BT and Bluetooth cell phone within 1 meter when pairing.
button, and press the SOURCE to select the Bluetooth mode.
2. Press
3. Switch on your cell phone's Bluetooth function and search for Bluetooth devices. After the search
is completed, select "SB100BT/SB200BT" from the Bluetooth device list.
4. According to indication, enter password or PIN No: "0000" and press "Yes" or "confirm".
5. After successful pairing, select "SB100BT/SB200BT" from the Bluetooth device list and press
"connect".
B. Pairing with a Bluetooth stereo transmitter
Different Bluetooth transmitters have different pairing ways. Please refer to the user manual of your
Bluetooth transmitter for further information. The general pairing steps are as follows:
1. Keep SB100BT/SB200BT and Bluetooth transmitter within 1 meter when pairing.
2. Press
button, and press the SOURCE to select the Bluetooth mode.
3. Switch on your Bluetooth transmitter and let it enter pairing mode.
4. The transmitter will search and connect with SB100BT/SB200BT automatically. After successful
connecting, the Bluetooth voice will change when connected successfully.
Remarks:
• SB100BT/SB200BT will return to pairing mode automatically after disconnecting from a Bluetooth
device.
C. Music Playback
Connecting with a A2DP cell phone or Bluetooth transmitter.
1. Connect your cell phone or Bluetooth transmitter with SB100BT/SB200BT.
2. You can listen to your music from SB100BT/SB200BT now when playing it back.
3. Press Vol+ to turn up the volume, press Vol- to turn down the volume.
4. Press
to skip to the previous song.
5. Press
to skip to the next song.
to select track.
- EN 6 -

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sb200bt

Tabla de contenido