Remington Power Pro 500V Instrucciones De Operación página 23

E. REPLACING FIRING PIN
1. Insert transfer pin and push pin into outer liner assembly (see Figure 18).
2. Place sear spring into firing pin assembly. Slide firing pin assembly into outer liner
assembly (see Figure 18). Slide the firing pin guide onto the outer liner assembly.
Align the holes in the firing pin guide, the outer liner assembly, and firing pin
assembly so that the sear can pass easily through all three (see Figure 19).
3. Depress sear spring with sear and slide the sear and firing pin guide toward the
front of the tool.
Outer Liner Assembly
Transfer Pin
Push Pin
Figure 18 - Replacing Firing Pin
Guide, Firing Pin Assembly, Spring,
Transfer Pin, and Push Pin
F. REPLACING ROCKER ARM ASSEMBLY
1. Place rocker arm assembly, with rocker arm spring attached, into housing. The
rocker arm assembly will sit on top of the firing pin guide.
2. Push rocker arm pin through the housing and rocker arm assembly with a punch
and hammer.
3. Insert firing pin spring into outer liner assembly. Slide larger spring onto the outer
liner assembly.
Rocker Arm Assembly
Housing
Rocker Arm Pin
Figure 20 - Replacing Rocker Arm Assembly into Housing
114918
Tool Disassembly and
Firing Pin
Sear
Assembly
Spring
Firing Pin
Guide
Assembly
Firing Pin
Guide
Outer Liner Assembly
Figure 19 - Replacing Sear
Sear
Firing Pin Guide
Rocker Arm Spring
Firing Pin Guide
Firing Pin Spring
23
Sear
Spring