General Description; Main Specifications - ITS EKSELANS MSC 585 Serie Manual Del Usuario

1. General description

Ekselans has developed a complete range of multiswitches to mount in any type of
installation combining models and accessories. The multiswitches of MSE and MSC
series are with passive return path and terrestrial while the satellite band is active.
The range is completed with full active amplifiers in all bands of 5 and 9 lines.
The multiswitches, are universal and can be combined to be mounted in many
combinations both for stand alone configuration like houses, apartments,... (MSE
series) or cascaded installations like large buildings, campus,... (MSC series)
Moreover the MSC series can be combined together with the MSE series to expand
the stand alone installation in order to obtain more than 12 user outputs. In the same
manner, the MSE multiswitches can be used as end of cascade multiswitch.
The main advantage of MSC series is that allows expanding current installed systems
already mounted with MSE (stand alone) or MSC (cascade).

1.1. Main specifications

• Complete range of universal multiswitches that allow mounting all type of
installations (in cascade or stand alone) with a reduced number of references.
• Possibility to expand each multiswitch of MSC/MSE series by using others from
MSC series. By this way it is possible to enlarge the number of user outputs easily.
Is then possible to expand a cascade in a node (where there is a MSC) or at its end
(where there is a MSE)
• Multiswitches with passive return path and terrestrial band and active satellite
• High output levels both for satellite and terrestrial.
• Good linearity in all bands and outputs.
• Loss compensation at high frequency (TER/SAT)
• Lte optimized
• Passive return path. Compatible with
through coaxial systems.
MULTISWITCHES MSC 585 / MSC 989 SERIES
MULTISWITCHES MSE 58 / MSE 512 / MSE 98 / MSE 912 SERIES
LINE AMPLIFIERS FOR MULTISWITCHES AMP 55 / AMP 99 SERIES
system to distribute internet
• Feeding at 12Vdc at any multiswitch (MSE or MSC series) or amplifier (AMP series)
of the installation
• The MSE and MSC multiswitches allow the feeding of mast amplifiers by using an
ON/OFF switch.
• Low consumption of the multiswitch when the connected receiver to an output
enters in stand-by mode.
• User outputs in one single left-side. Room optimization and easiness of working.
1.2. Complete range of multiswitches, amplifieres and accessories
Code Ref.
090001 MSC 585 Multiswitch 5 inputs 8 user outputs for MSE expansion or cascade
Multiswitch 5 inputs 8 user outputs for installation in star or end
090002 MSE 58
cascade
Multiswitch 5 inputs 12 user outputs for installation in star or end
090003 MSE 512
cascade
090004 MSC 989 Multiswitch 9 inputs 8 user outputs for MSE expansion or cascade
Multiswitch 9 inputs 8 user outputs for installation in star or end
090005 MSE 98
cascade
Multiswitch 9 inputs 12 user outputs for installation in star or end
090006 MSE 912
cascade
Connection bridge for expanding multiswitches. F fast connector male/
165003 AFM
male
5 lines trunk amplifier (1x Return Path + Terrestrial + 4x SAT) for
090008 AMP 55
signal amplification in cascaded installations.
9 lines trunk amplifier (1x Return Path + Terrestrial + 8x SAT) for
090009 AMP 99
signal amplification in cascaded installations.
101002 AL 23 Line amplifier for terrestrial band. Gain: 23 dB
071010 FA 2600P External power supply 12V / 2,6A
071006 FA 1210 External power supply 12V / 1A
Description
10