Lights - Cafe CVW9301 Manual Del Usuario

Lights

Be sure electrical power is off and all surfaces are cool before cleaning or servicing any part of the vent hood.
NOTE: The glass cover should be removed only when
cold. Wearing latex gloves may offer a better grip.
CAUTION
Before replacing your light bulb,
disconnect the electrical power to the hood at the main
fuse or circuit breaker panel.
Be sure to let the light cover and bulb cool completely.
For your safety, do not touch a hot bulb with bare hands
or a damp cloth.
To remove:
1. Turn the glass cover
counterclockwise until
the glass cover clears the
socket.
2. Using gloves or a dry cloth,
remove the bulb by pulling it
straight out.
49-2000061 Rev. 1
Receptacle
Socket
Bulb
Glass cover
To replace:
1. Use a new 12-volt, 20-watt (maximum)
Halogen bulb for a G-4 base.
2. Using gloves or a dry cloth, remove the new bulb from
its packaging. NOTE: Do not touch the new halogen
bulb with bare fingers. Touching the bulb with bare
fingers will significantly reduce the life of the bulb.
3. Push the bulb straight into the receptacle all the way.
4. Place the glass cover onto the socket and turn
clockwise until secure. For improved lighting, clean
the glass cover
Receptacle
frequently using a
damp cloth. This
should be done
when the hood is
completely cool.
5. Reconnect electrical
power to the hood.
Use
gloves
or cloth
7