Indoor Unit - Electrolux EPI09LEIW Manual De Instrucciones

7.4. Indoor unit

Installing the mounting plate

Fit the installation plate horizontally
on structural parts of the wall with
spaces around the installation plate.

If the wall is made of brick, concrete
or the like, drill five or eight 5mm
diameter holes in the wall. Insert Clip
anchor for appropriate mounting
screws.

Fit the installation plate on the wall
with five or eightSelf-tapping Screw
ST3.9x25.
120mm or
more to wall
Left rear side
refrigerant pipe
hole Ø 65
120mm or
more to wall
Left rear side
refrigerant pipe
hole Ø 65
120mm or
more to wall
Left rear side
refrigerant pipe
hole Ø 65
NOTE:

Mount the Installation Plate and drill
holes in the wall according to the wall
structure and corresponding mounting
points on the installation plate.

The installation plate provided

with the machine differ from appliance
to appliance.

Dimensions are in mm unless
otherwise stated.
150mm or more to ceiling
9000Btu/h models
150mm or more to ceiling
12000Btu/h models
150mm or more to ceiling
18000Btu/h models
ENGLISH
Indoor unit outline
120mm or
more to wall
Right rear side
refrigerant pipe
hole Ø 65
Indoor unit outline
120mm or
more to wall
Right rear side
refrigerant pipe
hole Ø 65
Indoor unit outline
120mm or
more to wall
Right rear side
refrigerant pipe
hole Ø 65
18