Transport And Storage; Safety Measures - BEHA Unitest Hexagon 50 Manual De Uso

2.0

Transport and Storage

Please keep the original packaging for later transport, e.g. for calibrati-
on. Any transport damage due to faulty packaging will be excluded from
warranty claims.
In order to avoid instrument damage, it is advised to remove accumula-
tors when not using the instrument over a certain time period. However,
should the instrument be contaminated by leaking battery cells, you are
kindly requested to return it to the factory for cleaning and inspection.
Instruments must be stored in dry and closed areas. In the case of an
instrument being transported in extreme temperatures, a recovery time
of minimum 2 hours is required prior to instrument operation.
3.0 Safety Rerferences
The respective accident prevention regulations established by the
professional associations for electrical systems and equipment
must be strictly met at all times.
The respective accident prevention regulations established by the
professional associations are to be strictly enforced at all times
regarding body protection in the event of danger of burns.
In order to avoid electrical shock, the valid safety and VDE regulati-
ons regarding excessive contact voltages must receive utmost
attention, when working with voltages exceeding 120V (60V) DC or
50V (25V)rms AC. The values in brackets are valid for limited ran-
ges (as for example medicine and agriculture).
Measurements in dangerous proximity of electrical systems are
only to be carried out in compliance with the instructions of a res-
ponsible electronics technician, and never alone.
29