Bluetooth Operation; Hands-Free Operation - Kicker IQ Serie Guia De Inicio Rapido

Bluetooth Operation

With your amplifier(s) and IQI powered on and connected via the
included DIN cable(s), press the Pairing button - short press - on the
IQI The Bluetooth icon will begin blinking Set your Bluetooth audio
device to scan for available connections
Select "IQI" and use [0,0,0,0] for the passcode if prompted You
may pair up to four devices The Bluetooth LED on the front of the
IQI will be solid when connected You are now ready to use the IQ's
DSP with the TWEEQ app, and stream music directly to your amp(s)
using your favorite app or streaming service! When streaming or
using TWEEQ, the AMP COM LED will be active

Hands-Free Operation

Connect the supplied microphone and control-button jack to the
connection labeled "MIC" on the front of the IQI Any phone calls will
now be routed through your audio system - simply use the control
button to answer and hang up! You may also enter pairing mode by
pressing and holding the control button
6