Restrictions For The Sub Remote Controller - Mitsubishi Electronic PAR-30MAOA Manual Del Usario

Setting and display
items
Night setback Use to make Night setback settings.
Select "Yes" to enable the setting, and "No" to disable the setting. The
temperature range and the start/stop times can be set.
* Clock setting is required.
* 1ºC/1ºF increments
Filter information
The filter sign can be reset.
Use to check error information when an error occurs.
Error information
Error code, error source, M-NET address, unit model, manufacturing
* The unit model, manufacturing number, and contact information need
to be registered in advance to be displayed.
Maintenance Manual
vane angle
Initial Clock Use to set the current time.
setting
Main Use to switch between "Full" and "Basic" modes for the Main
display.
display
The default setting is "Full."
Contrast Use to adjust screen contrast.
Language Use to select the desired language.
selection
Daylight Sets the daylight saving time.
saving time
Use to make settings for indoor unit's functions.
Service Function
setting

Restrictions for the sub remote controller

Main Main menu
Vane Louver Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
Main display:
Cursor Page
Setting details
The following settings cannot be made from the
sub remote controller. Make these settings from the
main remote controller. "Main" is displayed in the
title of the Main menu on the main remote controller.
Timer
(On/Off timer, Auto-Off timer)
Weekly timer
OU silent mode
Energy saving
(Auto return, Schedule)
Night setback
Maintenance
(Manual vane angle)
Reference
page
46
59
61
48
26
51
52
53
55
57
19