Additional Items Not Included; Unpacking; Glossary; Battery Charger - Campbell Hausfeld MF349099 Instrucciones De Operación, Instalación Y Mantenimiento

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

Operating Instructions and Parts Manual

Unpacking

Framing Nailer

Oil

Battery

Gas Valves

Cleaning Instructions

Cordless

Framing Nailer

This manual provides an easy and effective

way to clean this tool. Regular cleaning

will maintain reliable operation, extend

part life, and provide maximum nail driving

power.

You will need the following items to

complete this cleaning proceedure:

Allen wrenches

Oil

Degreaser cleaner

The hex key wrenches and lubricating oil

Operating Instructions and Parts Manual

provided in the tool case are essential

for the cleaning process. Please locate

Cordless

the hex key wrenches and oil in the case

before beginning this cleaning process.

Framing Nailer

We recommend that an aerosol degreaser

cleaner (sold separately) be used for the

cleaning process. Make sure that the

http://www.chpower.net/reg

degreaser cleaner you have selected to

Description

use will not damage rubber. The o-ring

seals of this tool are made of a rubber

Specifications

This gas powered nailer is designed for framing, trusses, sub-floors, sheathing, exterior

compound. Chemical damage to these

decks, and pallet/create assembly. Features include: convenient rear loading magazine

o-rings may result in the tool being

Model NF349099

which holds up to 48 nails, tethered no-mar decking tip, quick clear nose, an adjustable

made inoperable. Always follow the

depth of drive mechanism, oil free, in-line magazine, anti-dry fire, adjustable rafter,

Requires: Battery Fuel Cell

manufacturer's warnings and instructions

hook, and battery indicator light.

when using a cleaning solution.

Fastener Size Range:

Cleaning

2 inches to 3-1/2 inches long

solutions

are flammable and can ignite if

0.113 inch to 0.131 inch

sprayed at a heat source. Never

shank diameter

spray any cleaner on this tool

31° to 34°

unless the tool has been allowed to cool

down.

Magazine Capacity:

48 fasteners per load

Weight:

7 lbs. 5 oz. (tool alone)

7 lbs. 10 oz. (with battery and

fuel cell)

Length: 12-1/2 inches

Height: 14-7/8 inches

Cycle Rate:

2 - 3 nails per second

1000 nails per hour

Pressure Range: 70 psi to 120 psi

Battery: Li - ion 7.4 V

Battery Weight: 0.24 lbs.

Battery Charger:

FRANÇAISE: Page 7

Single Phase AC 100 - 240 V

SAVE THESE INSTRUCTIONS

50 - 60 Hz

ESPAÑOL: Página 13

DO NOT DISCARD

Charging Time:

For parts, product & service information

IN742800AV 7/12

5 minutes (200 nails)

visit www.chpower.com

Max. charging time 120 minutes

Charging Voltage: DC 7.4 V

Charging Current: DC 1.2 A

Locate model number and date code on

magazine and / or tool body. Record below:

Model #: _____________________________

Date Code: ___________________________

FRANÇAISE: Page 19

SAVE THESE INSTRUCTIONS

ESPAÑOL: Página 37

DO NOT DISCARD

Retain these numbers for future reference.

For parts, product & service information

IN742700AV 7/12

visit www.chpower.com

Operating Instructions

and

Cleaning Instructions

Glossary

Become familiar with these terms before operating the unit.

ACTUATE (TOOL) — To cause movement to the tool's component(s) intended to drive the fastener.

ACTUATION SYSTEM — The use of a trigger, work contact element (WCE) and/or other operating control, separately or in

combination or sequence, to actuate the tool.

FASTENERS — The nailer uses fasteners ranging from 2 inches to 3-1/2 inches long, from 0.113 inch to 0.131 inch shank diameter,

and from 30° to 34°.

MAGAZINE — The part of the nailer that holds the Fasteners.

FUEL CELL — A compressed aerosol gas used to power the fastener delivery system of the tool.

BATTERY — The electrical component of the tool that powers the nailer ignition system, fan, and indicating LED light.

BATTERY CHARGER — Supplies charge to the battery for use of the tool.

ANSI Z87 Eye Protection

Allen Wrenches

Battery Charger Base and Adaptor

Carry Case

After unpacking the unit, inspect carefully

for any damage that may have occurred

during transit. Check for loose, missing,

or damaged parts. Make sure to tighten

fittings, bolts, etc., before putting unit into

service. Check to be sure all supplied

accessories are enclosed with the unit. In

case of questions, damaged or missing

parts, please call 1-800-543-6400 for

customer assistance.

CONTENTS

◆

Framing Nailer

◆

Battery

◆

Battery Charger Base and Adaptor

◆

Allen Wrenches

◆

Operating Instructions

◆

Cleaning Instructions

◆

ANSI Z87 eye protection

◆

Oil

◆

Two (2) Replacement Gas Valves

◆

Carry Case