Trouble.sHooting; Fault.cOrrection - Parkside PNTS 1500 A1 Manual De Instrucciones Original

GB MT
Trouble shooting
Problem
Device does not
start
Low or lack of
suction
36
Possible.cause
Mains voltage is not
present
Defective on/off switch
( 10)
Worn carbon brushes
Defective motor
Hose system (
or jets ( 21-24) blocked
Suction pipes (
assembled incorrectly
Collector ( 5) open
Collector ( 5) full
Filter ( 11/12/13) full or
clogged

Fault.correction

Check plug socket, cable, line,
plug and fuse, where appropriate,
repair through electrical specialist
Repair through customer service
18/19)
Remove obstructions and blockages
16)
Assemble suction pipes correctly
Close collector
Empty collector
Empty, clean or replace filter