HQ-Power PROCD220 Manual Del Usuario página 3

9. REPEAT BUTTON
Use this button to repeat one track or all tracks of the CD.
10. PROG BUTTON
Program up to 20 tracks in STOP mode
• Press the STOP button to engage the stop mode.
• Press the program button to enter the program mode.
• Select a track with the skip track buttons (4 & 6) and press the PROG button to enter your choice.
• Repeat the operation to select all the tracks you want to listen to.
• Press the play / pause button to start playback.
11. DIGITAL OUT BUTTON
Pressing this button activates the digital outputs (cinch and optical digital outputs)
12. A BUTTON (LOOP SYSTEM)
This button sets the beginning of the loop. The loop indicator on the display flashes.
13. B BUTTON (LOOP SYSTEM)
When you press this button, you set the end point of the seamless loop and you start the loop. Press this
button again to finish the loop.
14. RELOOP BUTTON (LOOP SYSTEM)
This button is used to start the last saved loop. Press the reloop button to finish the loop.
15. TIME BUTTON
Use this button to choose the time mode: Elapsed time, remaining time or total remaining time.
16. CONTINUE / SINGLE BUTTON
Press this button to toggle between the SINGLE and CONTINUE play mode. The selected mode is indicated
on the LCD. In SINGLE mode the unit stops reading after every track. In CONTINUE mode, the unit reads all
tracks and then stops.
17. PITCH BEND – BUTTON
The pitch drops while the button is pressed and returns to the original pitch when it is released.
18. PITCH BEND + BUTTON
The pitch rises while the + button is pressed and returns to the original pitch when it is released.
19. STOP BUTTON
Press this button to interrupt playback.
20. PITCH BUTTON
ON/OFF button for the pitch adjustment.
21. DISPLAY
22. PITCH CONTROL
Use this fader to increase or decrease the track speed.
7. Back Panel Description
23. DIGITAL OUTPUT (OPTICAL) CD PLAYER 1
Optical jack. This is the digital output for CD player 1. Connect it to the line input of the D/A amplifier.
PROCD220 3 VELLEMAN