Et U P; Display Language; Tone/Pulse Dialing; Area Code - RCA 25110 Guia Del Usuario

Connections & Setup
Handset Set Up
There are six programmable menus available: Display Language, Tone/Pulse
Dialing, Local Area Code, Ringer Tone, Ringer Volume and Factory Default.
When you program these settings, make sure the phone is OFF (not in talk mode).
Pressing the *Exit button will remove you from the menu selection process without
changing the feature you are in.

Display Language

1. Press the Prog/Flash button until 1ENG 2FRA 3ESP shows in the display.
2. Use the CID/Vol ( 5 or 6 ) buttons or the handset number pad to select
1.ENGLISH, 2.FRANCAIS, or 3.ESPANOL. The default setting is 1ENG.
3. Press the Prog/Flash button to confirm. You will hear a confirmation tone.

Tone/Pulse Dialing

1. Press the Prog/Flash button until 1TONE 2PULSE shows in the display.
2. Use the CID/Vol ( 5 or 6 ) buttons or the handset number pad to select
(1) TONE or (2) PULSE. The default setting is TONE.
3. Press the Prog/Flash button to confirm. You will hear a confirmation tone.

Area Code

1. Press the Prog/Flash button until - - - SET AREA CODE shows in the display.
2. Use the handset touch-tone pad to enter your three digit area code. - - - is the
default setting.
3. Press the Prog/Flash button to confirm. You will hear a confirmation tone.
1