Description; Intended Use; Atex Information; Area Classification - Nederman FX2 ESD Manual De Instrucciones

4

Description

4.1

Intended use

FX EX/ESD is intended for applications where small, flexible and easy-to-use arms
2
are required. It is designed for use in electronic environments where there is a risk of
electrostatic discharges. The product can also be used for certain applications in potentially
explosive atmospheres.
4.2

ATEX information

4.2.1

Area classification

• Zone, dust*: 21, 22
• Zone, gas*: 1, 2
* ATEX work directive 99/92/EC.
4.3

Technical specifications

4.3.1

Dimensions

See figure 1.
4.3.2

Technical data

See figure 2.
4.3.3

Material specification

See figure 3. See also Table 4-1. Material specification.
Table 4-1: Material specification
1. Conductive PP plastic
2. Anodically aluminium
3. Conductive PP plastic
4. Rubber: Conductive EPDM rubber
5. Painted aluminium
6. Anodically aluminium
7. Conductive PP plastic
8. Spring: Stainless steel
9. Damper: Conductive PP/TPE
10. Conductive PP plastic
11. Axle: Stainless steel
5

Installation

WARNING! Risk of personal injury.
Always read section 3. Safety before installation, use, service, or troubleshooting of this
product.
FX2 EX/ESD
FX EX/ESD EN
2
15