Yakima Universal MightyMount Manual Del Usuario página 4

WHEELFORK
for use with Forklift
sHoRt
cARRIAge bolt
sPAceR
nut
WRencH
1033297H - 4/24
ACCESSORY CHART
1. Find your accessory, and follow the diagram.
2. Install the spacer or the adapter depending on your accessory.
REMOVE THE UPPER PAD BEFORE CONTINUING.
1. Insert the short carriage bolts into the anti-spin pad
and through the wheelfork, spacer, and into the
mightymounts.
2. Secure the spacer and accessory to the backbone
using the wrench.
3. Reattach the pad.
4. Attach to crossbar, secure with bail and wheel.
5. Read warnings on final page!
ADAPTER POSITION:
if your factory bars are angled, and the spacer is not
flat against the accessory, loosen the carriage bolt and
rotate the spacer on the MightyMount.
You will need to remove the pad; be sure to replace it
once the bolt is tightened.
AntI-sPIn PAD
WHeelfoRK
WATER, BIKES, AND CARGO: continued next pages...