Information About Electromagnetic Compatibility - INQUA 1000 Instrucciones De Uso

Information about
electromagnetic
compatibility
38

Keep the compressor and the power adapter cable away from hot
surfaces (e.g., stove top, electric fire, open fire). Direct heat may
damage the compressor housing or the cable insulation.

Keep the power adapter cable away from domestic animals
(e.g., rodents). They may damage the cable insulation.

Plug the compressor into an easily accessible mains socket so
that it can be disconnected from the power source quickly.

Route the power adapter cable in such a way that it is not a trip-
ping hazard and no one can become entangled in it.

Make sure that children cannot pull on the power adapter cable
or connection tubing and cause the compressor to fall.
Environmental conditions for operation
Ambient temperature:
Relative humidity:
Atmospheric pressure:
®
The INQUA Inhalator 1000 satisfies the requirements of
DIN EN 60601-1-2 in respect of electromagnetic compatibility. Elec-
trical medical equipment is subject to special precautionary meas-
ures with regard to electromagnetic compatibility (EMC). Such
equipment must only be installed and operated in accordance with
EMC instructions.
Portable and mobile high-frequency communication devices can
disrupt electrical medical equipment. Using accessories, converters
and power cords other than those specified, with the exception of
converters and power cords that the manufacturer of the medical
electrical device sells as spare parts for internal components, can
result in higher emission levels or lower the resistance to interfer-
ence of the device.
The device must not be placed directly beside or on top of other
devices for operation. If the medical electrical device must be placed
beside or on top of other devices to operate it, it should be monitored
constantly to ensure that it is operating properly in the arrangement
used.
10 °C to +40 °C
30% to 75% (non-condensing)
700 hPa to 1,060 hPa