Tabla de contenido
Publicidad
Interior del GT 1X12 L.A. -
HORIZONTAL DISPERSION
Notes: dispersion measured with two waveguides coupled to a 90º x 5º horn in anechoic chamber, 1w @ 2m.
All angle measurements are from the axis (45º means +45º).
TECHNICAL SPECIFICATIONS
Throat diameter
Rated impedance
Minimum impedance
D.C. Resistance
Power capacity
Program power
Sensitivity *
Frequency range
Recommended crossover
Voice coil diameter
Magnetic assembly weight
Flux density
BL factor
MOUNTING INFORMATION
Overall diameter
Depth
Mounting
Net weight (1 unit)
Shipping weight (2 units)
Inside GT 1X12 L.A.
20.5 mm (0.8 in)
8 ohms
5.5 ohms @ 4.5 kHz
5.6 ohms
50 W RMS above 1.5 kHz
100 W above 1.5 kHz
105 dB 1w @ 1m
coupled to a 90º x 5 º horn
0.7 - 20 kHz
1500 Hz or higher
(12 dB/oct. min.)
44.4 mm (1.75 in)
0.6 kg (1.32 lb)
1.8 T
8 N/A
80 mm (3.15 in)
195 mm (7.68 in)
Four 6 mm diameter holes
1.1 kg (2.42 lb)
2.6 kg (5.72 lb)
VERTICAL DISPERSION
DIMENSION DRAWINGS
Note: * Sensitivity was measured at 1m distance on axis
with 1w input, averaged in the range 1-7 KHz
CONSTRUCTION MATERIALS
Waveguide
Driver diaphragm
Driver voice coil Edgewound aluminium ribbon wire
Driver voice coil former
Driver magnet
11
Aluminium
Polyester
Kapton
Neodymium
Publicidad
Tabla de contenido
