Setting The Am/Fm Preset Stations; Button Beeps; Backlight Dimmer - Midland WR400 Manual Del Propietário

WR400 Owner's Manual

Setting the AM/FM Preset Stations

You can program 4 AM and 4 FM radio stations into the radio's preset memory.
To program a preset station, do the following:
1. Turn the AM/FM radio on and use the tuning buttons to find your desired
station.
2. Press and hold the preset button you want to program for 1 second. If
beeps are enabled, the radio will beep confirming the station has been
saved to the desired preset. There will also be an indicator on the display
that corresponds with the preset setting; "P1," "P2," "P3," or "P4."

Button Beeps

To turn the button beeps off press the MENU button.
1.
Press the ▲ or ▼ arrows until the display says BUTTON BEEPS, then
2.
press ENTER.
3. You now have the option of turning the button beeps either ▲ or ▼. If
you want to disable the button beeps select OFF then press the ENTER
button.
Press the MENU button to save your settings and exit the menu.
4.

Backlight Dimmer

The backlight brightness on the WR400 can be adjusted in the menu from
levels 1 to 10 with 10 being the brightest.
To adjust the backlight dimmer setting press the MENU button.
1.
Press the ▲ or ▼ arrows until the display says BACKLIGHT. Press the
2.
ENTER button.
3. You now have the option of selecting between backlight levels 1 to 10.
Scroll to your selection using the ▲ or ▼ arrows then press the ENTER
button.
4. Press the MENU button to save your settings and exit the menu. Now
when you press the backlight dimmer button, the LCD backlight will dim
to your chosen brightness setting.
page 8 midlandusa.com