Before using the Class 2 Power supply, read these instructions carefully.
This trimmer should only be used with the supplied adapter.
Use only with adapter Model No.: C045100-A
which is provided.
Rated input voltage: 100-240V ~, 50/60Hz 0.2A
Rated Output: 4.5V DC 1000mA
OPERATION
1. For dry location use only. Do not expose to water.
2. When not in use, unplug unit completely.
3. Unit will become warm during operation.
CAUTION
1. Dry location use only. Do not expose to liquids, vapor, or rain.
2. Ensure jack is plugged into the trimmer unit before plugging the adapter into the
outlet.
3. Do not operate any appliance that has a damaged output cord or housing.
4. Always unplug the unit before cleaning or when not in use.
5. Be sure voltage is correct before plugging in. For connection to supply not in the
U.S.A. use an attachment plug adapter of the proper configuration for power outlet.
The included adapter automatically adjusts to the input voltage. DO NOT USE A
VOLTAGE CONVERTER.
TRIMMER CHARGING PRECAUTIONS
• Avoid charging the batteries at temperatures below 41° F (5° C) or above 95° F (35° C).
• Avoid charging the batteries in direct sunlight or near a radiating heat source.
• Even though the trimmer may not be used for an extended period, charge once a
month to preserve battery life.
• The power cord cannot be replaced. If it is damaged, the AC adapter should be
discarded.
TRIMMER OPERATING PRECAUTIONS
• This trimmer has a built-in rechargeable battery. Do not throw into fire, apply heat, or
charge, use, or leave in a high-temperature environment.
WARNING:
IF YOU THINK THE
POWER IS OFF WHEN
THE SWITCH IS OFF,
YOU'RE WRONG.
Everyone knows that electricity and water are a dangerous
combination. But did you know that an electrical appliance is
still electrically live even if the switch is off? If the plug is in, the
power is on. So when you are not using the appliances, keep
them unplugged.