Safety Instructions; Contents Of Carton; Installation; Installation Considerations - Rockford Fosgate FFC65 Instalación Y Funcionamiento

CAUTION: To prevent injury and damage to the unit, please read and follow the
!
instructions in this manual. We want you to have enjoyment from this
system, not a headache.
CAUTION If you feel unsure about installing this system yourself, have it installed
!
by a qualified Rockford Fosgate technician.
CAUTION Before installation, disconnect the battery negative (-) terminal to
!
prevent damage to the unit, fire and/or possible injury.
One (1) Pair of Full Range Speakers
One (1) Pair of Grilles
20' (6.1m) of 18 gauge Speaker Wire

INSTALLATION CONSIDERATIONS

The following is a list of tools needed for installation:
#2 Phillips screwdriver
Battery post wrench
Hand held drill w/assorted bits
Since some of these Punch High Performance Full Range Speakers are most often used as direct
replacements for stock speakers and are shipped without grilles, some of the following instructions
will not apply. For custom installations see your Authorized Rockford Fosgate Dealer.
CAUTION: If you feel unsure about installing this system yourself, have it installed
!
by a qualified Rockford Fosgate technician.
CAUTION: Before installation, disconnect the battery negative (-) terminal to prevent
!
damage to the unit, fire and/or possible injury.
Before beginning any installation, follow these simple rules:
1. Be sure to carefully read and understand the instructions before attempting to install the Unit.
2. For safety, disconnect the negative lead from the battery prior to beginning the installation.
3. For easier assembly, we suggest you run all wires prior to mounting your Unit in place.
4. Use high quality connectors for a reliable installation and to minimize signal or power loss.
5. Think before you drill! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic
lines, vacuum lines or electrical wiring when working on any vehicle.
6. Never run wires underneath the vehicle. Running the wires inside the vehicle provides the best
protection.
7. Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect any
wires routed through metal, especially the firewall.
This symbol with "WARNING" is intended to alert the user to the
presence of important instructions. Failure to heed the
instructions will result in severe injury or death.
This symbol with "CAUTION" is intended to alert the user to the
presence of important instructions. Failure to heed the
instructions can result in injury or unit damage.
C
Installation & Operation Manual
Mounting Hardware
Wire strippers
Wire crimpers
Wire cutters
S I
AFETY NSTRUCTIONS
C
ONTENTS OF ARTON
I
NSTALLATION
3