Maintenance Plan - Solo 425 Classic Manual Del Usario

6 Maintenance, cleaning and storage

6.8 Maintenance plan

Entire backpack sprayer
Hoses and their screw
connectors
Spraying agent tank
Nozzles and filter element Clean (section 6.6)
Filling strainer
Cap gasket
Piston collar and pump
piston (only for
425 Classic)
Never start working if there are any irregularities or leaks, if you can see any damage to the equipment or
if the equipment is not working properly in any way. In this event, immediately have the device checked by
a specialist workshop.
If you have any questions please refer to your authorised SOLO dealer.
ENGLISH 12
Check whether the device is safe to use:
x Visual inspection of the device
x Check the tightness of all equipment
components
(at maximum permissible pressure
with open and closed shut-off valve)
x Check the function of all active
components (pump lever,
shut-off valve)
Visual inspection
Visual inspection
Clean (section 6.6)
Trial run to check the spray nozzles and
the filter element by measuring the
delivery rate (section 6.2)
X*: A monthly trial run is required only
if the device is used frequently.
Visual inspection
Clean (section 6.6)
Grease (section 6.4)
Grease (section 6.5)
X
X
X
X X
X X X
X X* X
X
X X X
X X
X