Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Option B:
Click the mounting clip A
product.
Use A
7
to mount the product to or near a water
reservoir.
2. Fill the water reservoir with water.
3. Press the irrigation tube A
A
t
.
4. Cut a piece off A
. Make sure A
u
bottom of the water reservoir.
5. Connect A
to the water filter A
u
6. Place A
u
in the water reservoir.
7. Create an irrigation network using A
provided connectors A
9qw
example in image C.
8. Insert the arrow drippers A
A
u
for every irrigation point.
9. off any remaining tube ends of A
plugs A
e
.
10. Connect the irrigation network to the water
outlet A
y
.
Using the product
-
Disconnect the product when freezing
temperatures are expected, to avoid potential
freeze damage.
Use the app to set and operate the product.
4
For more information about the working and
possibilities of the app, consult the extended manual
online.
Manual irrigation
1. Press the manual irrigation button A
the time set in the app.
The irrigation indicator LED A
the product is irrigating.
2. Press A
2
to manually stop the cycle.
Automatic irrigation
Automatic irrigation is only available in the app.
4
Plugging A
i
is required to set or change the
4
automatic irrigation settings.
1. Plug A
into A
i
5
.
2. Plug the other end of A
; 1.0 A USB power supply.
-
Do not use a USB power supply with a higher
voltage.
7
on the back of the
u
into the water inlet
reaches the
u
r
.
and the
u
. See an installation
8
into the ends of
with end
u
2
to irrigate
lights up to indicate
1
into a suitable 5.0 VDC
i
3. Set the desired irrigation frequency at How often
B
4
.
Select a delay between 1 hour and 7 days.
4. Set the desired irrigation duration at B
Select a duration between 6 seconds and 30
minutes.
5. Tap Auto Run B
6
irrigation schedule.
After confirming the automatic irrigation settings,
the Working Status B
The product starts the countdown to the first
irrigation at Next Irrigation B
The product starts irrigating for the selected
duration. The Remaining Watering Time B
shows a countdown until the current irrigation ends.
When the first irrigation has finished, the product
will irrigate again after the selected delay.
Status indicator LED
Irrigation
Blinks every 0.5
indicator LED
second.
A
1
Lights up.
Wi-Fi indicator
Blinks every 0.5
LED A
3
second.
Blinks every 1.5
seconds.
Blinks every 3
seconds.
Blinks 0.5
second on and
3 seconds off.
Lights up.
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the
product WIFIWP10GY from our brand Nedis®,
produced in China, has been tested according to all
relevant CE standards and regulations and that all
tests have been passed successfully. This includes,
but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the
safety datasheet if applicable) can be found and
downloaded via:
nedis.com/wifiwp10gy#support
6
5
.
to start the automatic
3
changes to Auto.
1
.
2
Lack of water.
Irrigating.
Ready for
pairing.
Searching for a
Wi-Fi network.
Batteries
almost empty.
Batteries
connected.
Paired with a
smartphone.
Publicidad
Tabla de contenido
