Accessing The Web Configurator - Zyxel G-3000H Guia De Inicio Rapido

Do the following to make hardware connections for
initial setup.
1 Using an Ethernet cable, connect the ETHERNET
port to a computer for initial configuration.
2 Connect the POWER 12VDC socket to a power
source using only the included power adaptor for
your region.
Note: Connect the ZyAIR ETHERNET port to an
Ethernet jack with Internet access after you
have completed the initial configuration.
1.1 The LEDs
The PWR and the ZyAIR LEDs turn on when the power
is connected. The ETHN LED turns on, if the
ETHERNET port is properly connected.
See the ZyAIR Front Panel LED Description table in the
User's Guide for more information.

2 Accessing the Web configurator

Use Internet Explorer 6.0 and later or Netscape
Navigator 7.0 and later versions with JavaScript
enabled.
ENGLISH
4