Specifications; Description Of Terminals; Jumpers Configuration (Jp1 And Jp2); Dip-Switch Configuration - Urmet mini note + 1722 Serie Manual De Instalación

7.1.

SPECIFICATIONS

1. 7" Touchscreen display
2.
Microphone
3. Active mute indication red LED
4. Sent Yokis control confi rmation blue LED
5. ON/OFF button
7.2.

DESCRIPTION OF TERMINALS

K, Z: Output for connecting supplementary ringers (OP2)
POW: Power voltage input from local power supply unit
LINE IN:
Bus Line input
LINE OUT: Bus Line output
7.3

JUMPERS CONFIGURATION (JP1 AND JP2)

The video door phone has 2 jumpers:
• JP1, used to power the "Slave" video door phone off the Bus Line or via a local power supply Ref. 1722/22 (see section "Connection block
diagram");
Power from Bus line (default)
Power from local power supply
• JP2, used for line termination connection. The line termination must be activated on a video door phone connected at the end of a line
without a new section restarting from the LINE OUT terminals.
Terminal not inserted
Terminal insert (default)
7.4

DIP-SWITCH CONFIGURATION

7.4.1

Video door phone code

Set the respective address using the dip switches on each apartment station to install "slave" video door phones.
Type of video door phone
"Master" video door phone
"Slave" 2 video door phone
7.4.2

Call button to video door phone association

Video door phone associated
with the call button 1
DS1722-081D
1 2
6 5
JP1
JP2
Dip switch position Type of video door phone
ON
"Slave" 1 video door phone
1 2 3 4
ON
"Slave" 3 video door phone
1 2 3 4
Dip switch position
ON
Video door phone associated
with the call button 2
1 2 3 4
Call button 1
→
9
3
4
8
6. Speakers
7.
Confi guration dip-switches
8. Connection terminal strips
9. Cable guide
10. Confi guration jumpers
K
Z
POW
Call button 2
←
10
JP1 JP2
7 8
LINE
ON
IN
LINE
1 2 3 4
OUT
Dip switch position
ON
1 2 3 4
ON
1 2 3 4
Dip switch position
ON
1 2 3 4
19