Troy-Bilt Bronco Manual Del Operador página 19

4. Remove all dirt and clean the area around the transmission
cover. See Figure 7-3.
Hex Screw
Transmission
Cover
Transmission
Figure 7-3
5. Remove the four hex screws (5⁄16-18 x .75) securing the
transmission cover to the drive shaft and remove the cover.
See Figure 7-3.
6. Remove the left-side wheel. Tilt the left-side wheel shaft
into a drain pan and allow the gear oil to drain through the
top of the transmission.
7. Reinstall the wheel and reinstall the transmission cover.
8. Refill the transmission using Mobil 1® Synthetic 75W 140.
Refill the engine with motor oil and replenish the fuel tank
with gasoline.
9. Reinstall the belt cover.
Housing
S 7 — S 19
ection ervice