Installation And Use - Guardian Fall Protection 01700 Manual De Instrucciones

Installation and Use

ALL PFAS equipment must be selected and deemed compatible with
ALWAYS follow all instructions of all equipment used
ALWAYS ensure all product-specific application specifications are met and adhered to.
For #01740, account for additional fall clearance as
demonstrated by this instruction manual (pg. 7).
NEVER attach connector to any place on harness other than D-ring.
Connector gate must be self-closing and self-locking, and must
Any excess strap webbing MUST be stored in harness Webbing Keepers.
To connect Pass-Through Buckle, angle male buckle so it
is positioned to pass up and through female buckle.
Fully insert male buckle so that it lies flat on top of
female buckle.
Roller and Friction Adjustments allow the user to make
adjustments to Velocity Harness straps. Feed webbing through
buckle, and slide the buckle down on the strap to tighten, or
slide the buckle up on the strap to loosen.
Dorsal D-ring, chest strap, shoulder straps, and leg straps
the Velocity Harness by a Competent Person.
in combination with the Velocity Harness.
withstand minimum load of 3,600 lbs.
To connect Tongue Buckle, pull webbing strap through
framed tongue component, and insert framed tongue
through grommet to secure.
To adjust dorsal D-ring, slide placard up or down webbing.
Dorsal D-ring must rest between the middle of the
shoulder blades.
MUST be fitted for each individual user.
11