Before You Begin - Altair AL-2167 Instrucciones De Instalación

PARTS:
Remove fixture and mounting package from box and make sure that parts are not missing
by referencing illustrations below. (Parts are not to scale.)
CAUTION:
•
All electrical connections must be in accordance with local and National Electrical Code
(N.E.C.) standards. If you are unfamiliar with proper electrical practices, obtain services
of a qualified electrician.
•
Turn off the main power at circuit breaker before installing fixture, in order to prevent
possible shock.

BEFORE YOU BEGIN:

•
NOTE: This product is not for use with rectangular junction boxes.
•
The outlet box described in the following section is not provided. To install this fixture, a
standard 10.2 cm / 4 in. outlet box needs to be pre-installed in the wall at the desired
location. Power supply wires need to be run to the outlet box providing 120 VAC of
power. If an outlet box does not exist, contact a qualified electrician to have one
installed.
•
Remove the hood screws and separate the glass shade from the hood.
[A] Fixture (1)
[B] Lock Nuts (2)
[C] Wire Connectors (3)
[D] Mounting Bracket (1)
[Q] Washers (2)
3
[E] Hex Nuts (2)
[F] Mounting
Screws (2)
[G] Fixture
Screws (2)