Controls And Indicators - Candy CS V8LF-S Manual De Instrucciones

6.
CONTROLS AND
INDICATORS
220'
END 120'
90'
3h 6h 9h
60'
END
3h 6h 9h
B
4
A-Programme Selector -
Rotating the knob in both directions it's
possible to select the desired drying
program. To cancel the selections or switch
off the dryer rotate the knob on OFF.
B-Buttons -
1.Start/Pause Button -
To start the selected program and/or
suspend it.
2.Time cycle selection -
It's possible switch a cycle from automatic to
timed , up to 3 minutes after the start of the
cycle. After this selection to reset the
automatic dying functioning is necessary to
switch off the dryer.In case of incompatibility,
all LEDs flash quickly for 3 times.
3.Drying Selection Button-
It allows to set the desired dryness level:
editable option up to 5 minutes after the
starting of the cycle:
- Ready to Iron : It leaves the garments
slightly wet to facilitate ironing.
- Dry Hanger : To get garment ready to be
hang
- Dry wardrobe : For laundry that can be
directly stored
- Extra-dry :To get completely dry
garments, ideal for full load .
A
D
C
220'
120'
90'
60'
1
3 2
This appliances is equipped with Drying
Manager Function. On automatic cycles,
each level of intermediate drying, prior to the
reaching the selected one, is indicated by
flashing the light indicator corresponding to
the degree of drying reached.
incompatibility, all LEDs flash quickly for 3
times.
4. Delay Start Button -
To postpone the start of the programm for 3h,
6h, or 9h. Opening of the porthole with
delayed start set,
porthole, press start againg to resume the
counting.
Automatic Anti crease -
This option automatically activates an anti-
creases movement of the drum, pre cycle in
case of activation of the delay and at the end
of drying cycle for
every 10 minutes. To stop the movements set
the knob to OFF
Useful when it's not possible to
immediately the laundry.
C- Led
Filter cleaning
cleaning of the filters is requested (the door
and the lower filter.)
These control lights, light up for indicate the
drying phase:
- It lights up when the drying cycle is
running.
- It light up when the cycle is in the
cooling phase.
-END: It light up when the cycle is done.
D-
SMART TOUCH area - pressing the
START/PAUSE button allows to a previously
downloaded cycle to start whilst the Touch
position is selected on the programme knob
(for downloading cycles from the App see the
relevant section of this user manual).
11
In case of
after re-closing the
6 hours. It is activated
remove
- It lights up when the