Ariston LIGHT GATEWAY Instrucciones De Instalacion Y Uso página 45

6.2.2 Automatic connection with the browser
(as alternative to par. 5.2.1)
1. Connect to the Remote Gw Thermo
network, launch the web browser (Inter-
net Explorer, Safari, Chrome, etc.) and
enter 192.168.1.1 in the address bar.
2. Make sure that the following options are
selected:
Authentication = Wpa & Wpa2 Personal,
Authentication type = Open
3. Select your own Wi-Fi (SSID) network
and enter the password.
3. Leave the default setting DHCP = ON
4. Click "Confi rm"
5. The gateway's WEB led will start fl ash-
ing green rapidly and then turn steady
on to confi rm that the procedure was
successful. The Sensys (if present) dis-
play visualises the "
the connectivity menu is available). The
average waiting time is 2–3 minutes.
Warning!
After confi rming the procedure, your device (smartphone, PC, tablet ...) will automati-
cally disconnect from the Remote GW Thermo network; an error page may appear in
the browser window that can be ignored.
" icon steadily (if
GB
\ 45