Menu item setting
The settings of the convertible camera were preset when the camera was shipped from the manufacturing plant. However, the
menu items can be set or changed for each mode to match the actual shooting conditions. For details, refer to the camera's
operating instructions.
Menu displays
These displays can be set when the menu ON/OFF switch is set to [ON].
Setting procedure
Press the item UP switch to select the item which is the next one up from the current item on the menu.
Press the item DOWN switch to select the item which is the next one down from the current item on the menu.
When the DATA YES/UP switch is pressed while the main menu is displayed, the submenus of the items are displayed.
When it is pressed while a submenu is displayed, the setting is incremented.
When the DATA NO/DOWN switch is pressed while the main menu is displayed, the item which is the next one down from
the current item on the menu. When it is pressed while a submenu is displayed, the setting is decremented.
After setting or changing the menu items, set the menu ON/OFF switch to [OFF].
From this point on, the camera will operate under these settings.
DATA YES/UP switch
Item DOWN switch
Item UP switch
Menu ON/OFF switch
DATA NO/DOWN switch
17 (E)