Uponor R-56 Manual De Instalación Y Funcionamiento página 5

Uponor Remote access module R-56
SMS description
See picture A for system
description.
The Uponor Remote access module R-56 can remote control a
changeover between comfort and ECO-mode. The module is connected
to the controller via a Uponor Thermostat T-54 Public. The thermostat
sends a message to the controller when the relay status in the SMS
module is changed. A closed relay forces ECO-mode. This gives the
following basic remote control:
• The homeowner can set the system to ECO-mode when leaving the
house by sending an SMS.
This is the recommended way since this also gives a function
verification for the remote service.
Note! This will also be possible by manual operation, i e by using a
button on the module.
• The homeowner can at will set the system remotely by SMS to
comfort or by manually pressing the button on the SMS module.
Additional SMS functions are
• temperature readout
• temperature alarm
• alarm limit setting
• parameter configuration
U P O N O R R E M O T E A C C E S S M O D U L E R - 5 6 - M A N U A L
UK
1