Palmer Peabi AB-I Manual De Usuario página 5

PANELS
5
4
2
3 5
INSTALLATION & OPERATING:
1
GROUND LIFT SWITCH
With the ABI you can interconnect
two mains powe red devices (for
example 2 mixers). This constel-
lation can induce a ground loop
hum. Should this occur, use this
switch to lift the ground of the
3
second input.
2
SWITCH
6
With this switch you can toggle
between the two inputs. The switch
is latching, the LED indicates,
1
which input is active.
GND
3
INPUT/OUTPUT
Connect mic (only dynamic mics and
such that do not require phantom
power) or line signals to the in-
puts A and B.
Output: The selected input is
routed to the output.
4
PAD INPUT A
Use this switch to attenuate in-
put A by 15dB.
5
PAD INPUT B
To offer more flexibility, in-
put B can be padded in two steps
(15dB or 6dB). Both switches can
be used simultaneously to acheive
3 4
maximum pading.
6
LED
LED: This LED lights when input B
is selected (Note: A battery must
be inserted)
5