Assembly Instruction - LUTEC 6951302012 Manual De Instrucciones

ASSEMBLY INSTRUCTIONS
WARNING: The solar panel requires sunlight to charge the
batteries and should be installed in an area with a minimum
of 8 hours of direct sun exposure.
WARNING: The supplied LED bulbs have been specially
developed for use with the solar post light model 12513LE-SL
and must be replaced with model 9700357000. The use of
any other type bulbs will not function in the fixture.
1
Screw the threaded rod (BB) into the fixture
roof (A) as shown. Then rotate the finial (AA)
onto the threaded rod (BB) clockwise.
Hardware used
Top Finial
Threaded Rod
2
Unscrew the thumbscrews preassembled in
fixture roof (A), then detach the fixture roof (A)
from fixture body (B).
WARNING: Charging conditions differ by time zone
locations and affects total hours of light discharge.
WARNING: Batteries may have become depleted due to
lack of sunlight for an extended period causing the bulbs to
not illuminate. Please place the solar head in direct sunlight
for at least 6 hours prior to assembly.
x1
x1
5