General Information; Warnings - Urmet H.265 Guía Rápida

EN

General information

Dear Customer,
Thank you for purchasing this product.
This quick start guide was written to help you set up H.265 IP Camera Series
rapidly and easily.
Read this quick start guide which contains information for correct, safe use
carefully before using the device.
Keep this guide at hand so that you can refer to it when needed.
*NOTE
For more detailed information about the devices, refer to the complete user manual
available on the Urmet website (see QR code printed on the Addendum sheet).

WARNINGS

Electricity
Before connecting to electrical outlet, verify the electrical specifications of the
device are suitable for the available power source.
We suggest to connect the device to electrical outlet via a switch disconnector.
In case of malfunctioning, disconnect electrical power from the general switch.
Use only the provided power supply.
Safety precautions
Do not expose the device to rain or humidity and do not insert any solid or liquid object
in it to prevent the risk of fire or electrocution. In these events disconnect the device from
the electrical outlet and call technical assistance to check it.
Do not open the device. Any repair must be made by qualified personnel or by calling the
nearest authorized technical assistance center (www.urmet.com >> Contacts).
Keep the device away from children to prevent any, even involuntary, damaging.
Do not touch the device with wet hands as it might cause electrical shock or mechanical
damages.
If the device falls down while working or if the salesbox is damaged, do not continue using
it. If usage is continued under such circumstances electrical shocks might take place.
Contact the authorized retailer or installer.
Installation precautions
Do not install the camera in places with possible exposure to rain or humidity without the
proper protective case.
Do not point the camera directly to sunlight or other intense sources of light, even when
turned off. The subject of recording must not be against the light.
Do not point the camera against reflective objects.
Some light conditions (such as fluorescent color) can affect the recorded colors.
Use AUTO-IRIS lens when operating the camera in changing light environments.
Do not use this device on any unstable support such as lurching or sloping
25