Gram K3 Serie Manual De Utilización página 44

Format 4
Format 5
To select the required format press the
Then, press the
Press the
models shown above. To use a specific model, select its number by pressing
the and
Press the
"LFn" message, with two additional digits. Those represent the number of
empty lines that will be printed after the data block. If you set it to 1 or 0, the
printer won't leave any space between the data blocks. If you choose a higher
value (for example 10), the printer will leave 10 lines after printing.
Select the required value using the
44
-­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐
Q uantity:
G ross W.:
Net W.:
Unit weight:
Weight No.:
-­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐ -­‐
D eviation:
W eight limit:
Standard weight:
Weight no.:
button until the display shows the "PrnFrm" message.
button to modify the output format, from 1 to 5, according to the
buttons.
button to confirm the selection. The display will now show the
65 u
0.500 kg
0.500 kg
0.008 kg
#00013
- 0.500 kg
0.500 kg
1.000 kg
#00014
button with the scale in weighing mode.
and buttons. Use the and