Dmx Values - Chauvet DJ EVE F-50Z Guía De Referencia Rápida

EN
DMX Linking
The EVE F-50Z can work with a DMX controller. Instructions for connecting and configuring this product for
DMX operation are in the User Manual. If you are not familiar with DMX or DIP-switch configuration,
download the DMX Primer from www.chauvetdj.com.
Starting Address
To ensure full access to the two personalities available in DMX mode, the highest recommended DMX
address is 510.
Master/Slave Connection
The EVE F-50Z uses the DMX data connection for its Master/Slave mode. Instructions for connecting and
configuring this product for Master/Slave operation are in the User Manual.
D-FI USB Connectivity
The EVE F-50Z is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from
CHAUVET DJ. Simply set the DIP switch D-Fi receiving/transmitting channel, plug it into the USB port then
set the product's DMX Personality and DMX Address. Further instructions for D-Fi USB operation for this
product are in the User Manual.
Once plugged in, the D-Fi USB will take over the product. Wired DMX and manual
display control/menu buttons will be unavailable until you unplug the D-Fi USB.
The priority levels are:
1.
2.
3.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing
so may cause damage to the product.

DMX Values

3-CH
CHANNEL FUNCTION
1 Dimmer
2 Strobe
Dimmer Speed
3
Mode
1-CH
CHANNEL FUNCTION
1 Dimmer
5
QUICK REFERENCE GUIDE
D-Fi USB
Wired DMX
Manual Digital Display / Menu Buttons
000
000
011
000
052
102
153
204
000
VALUE PERCENT/SETTING
255 0-100%

010 No Function

255 Strobe (slow to fast)

051 Dimmer speed set from Display

101 Dimmer Speed Mode Off

152 Dimmer Speed Mode 1 - fast

203 Dimmer Speed Mode 2 - medium

255 Dimmer Speed Mode 3 - slow

VALUE PERCENT/SETTING
255 0-100%

EVE F-50Z QRG Rev. 1