Package Contents; Before Installation - D-Link DSN-4000 Serie Guía De Instalación Rápida

DSN-4000 series Quick Installation Guide
This Quick Start Guide provides the information needed to get your DSN-4100/DSN-4200 storage system
out of the box and operational with a direct connection to a host computer. Follow the simple instructions
in this guide, and in no time at all you will be part of the iSCSI revolution.
The DSN-4100/DSN-4200 storage system supports 16 3½ inch SAS or SATA hard disk drives, and it is
expandable up to 80 drives when used with DSN-4000 Expansion Arrays. It is available with either four or
eight 1-Gigbit iSCSI data ports.
Important Safety Information:
Before you install the DSN-4100/DSN-4200 storage system, please read all documentation provided on
the Product CD.

1. Package Contents

Before unpacking, inspect the outer shipping carton for damage. If any damage exists, file a claim with the
carrier. Remove the items from the shipping carton and compare them to the packing list:
• The DSN-4100/DSN-4200 storage system with 16 empty drive carriers and mounting screws
• One rack-mount kit in a box (includes rails, mounting hardware, and instructions)
• Two AC power cords for your country and one RS-232 diagnostic cable.
• A Product CD containing installation and operation information, and tutorials
• Additional documentation (may include warranty information, End User License Agreement and
product registration information)
If any contents are missing or damaged, please contact your supplier. Save all of the packing materials in
case you need to return the unit.

2. Before installation

To complete the installation, you need the following items:
• A static IP address and CAT5E or CAT6 network cable for each 1GbE iSCSI data port that will
connect to your SAN
• SAS or SATA Disk drives: refer to the DSN-4000_Series Hardware Reference Guide for instructions
for drive installation.
• Optional: In addition, a separate computer may be used as the Management console
• Optional, but recommended: Uninterruptible power supply
• Optional: Ethernet switch
3. Rackmount Instruction
The DSN-4100/DSN-4200 storage system can be mounted in a standard 19-inch rack using the
Rack-Mount Kit that is included with the product. The rack cabinet must provide sufficient airflow to the
front and back of the DSN-4100/DSN-4200 storage system to maintain correct cooling. It must include
ventilation sufficient to exhaust the heat generated by equipment in the rack. Always plan the installation
with the heaviest item on the bottom of rack.
A. Ensure that power is not being applied by removing the AC power cords and attaching the mounting
hardware provided to the left and right sides of the rack supporting the DSN-4100/DSN-4200 storage
system.
B. With the help of another person, slide the DSN-4100/DSN-4200 storage system into place and secure
with the mounting hardware.
2
D-Link DSN-4000_Series Quick Installation Guide