ALPATEC Taurus DH101 Manual De Instrucciones página 19

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 4
A7 Tank full indicator
A8 Digital display
A9 Defrost indicator (**)
(*) Only available in the model DH 201
(**) Only availabre in the model DH 101
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all the product's packaging has
been removed.
USE:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.Open the
cover (2).
- Guide the appliance to direct the flow of air in
the desired direction.
- Turn the appliance on, by using the on/off
button.
- Select the appliance function desired.
- Select the desired speed (A4).
- To avoid a fierce start up of the fan, it is advis-
able to start off from the lowest speed position
and, once the fan has been switched on,
progressively increase the speed to the desired
position.
HUMIDITY LEVEL:
- When the appliance is switched on, digital
display (A8) shows the humidity level in the
atmosphere.
- The humidity level can be changed by pressing
the Up Humidity button (A5) or Down Humidity
button (A6), which can be set from 30% to 90%
al 5% intervals. Once the selected humidity is
reached, the appliance will switch off automat-
ically.
- When the environment humidity is lower than
35% digital display will show "LO".
- When the environment humidity is higher than
95% digital display will show "HI".
FAN FUNCTION:
- (*) Only available in the model DH 201.
- Select the fan position.
- Select the desired ventilation speed.
TANK FULL INDICATOR:
- When the drainage tank is full, the tank full
indicator light will turn on (A7), the operation
will stop automatically and the buzzer will beep
15 times to alert the user, that the water need
tobe emptied from the drainage tank.
- Emptying the water tank: Hold the top and
bottom center of the water tank with both hands
and pull it out gently.
- Empty the collected water.
- Return water tank to its original position. The
tank full indicator will go off.
- If the tank is not positioned properly, the "tank
full" sensor will still be activated and the dehu-
midifier will not operate.
TIMER FUNCTION:
- (*) Only available in the model DH 201.
- The appliance's operating time can be con-
trolled by Timer button (A2).
SWITCH OFF USING TIMER:
- With the appliance running, press the timer
button (A2) as many times as may be neces-
sary to set the time after which you want the
appliance to switch itself off.
- Each press corresponds to 1h, up to 24h. The
time selected will flash on the display screen
to indicate that this has been set and the timer
light will come on. To cancel the timer, press
the timer button (A2) until the display screen
shows 0.
SWITCH ON USING TIMER:
- With the appliance switched off, press the
timer button (A2) as many times as may be
necessary to set the time afterwhich you want
the appliance to switch itself on. Each press
corresponds to 1h up to 24h.
LAUNDRY FUNCTION:
- (*) Only available in the model DH 201.
- Press the laundry button (A3) to Laundry
function.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance using the on/off button.
- Unplug the appliance from the mains.
- Put the cable back in the cable housing.
- Close the cover.
- Remove the water from the water tank.
- Clean the appliance.

Publicidad

Tabla de contenido
loading

Productos relacionados para ALPATEC Taurus DH101

Este manual también es adecuado para:

Taurus dh201

Tabla de contenido