Protecting The Environment - Black+Decker CS1840 Manual De Instrucciones

ENGLISH
Problem Possible cause
Debris in tank
Chainsaw not us-
ing oil
Oil hole in cap blocked
Debris in chain bar
Debris in oil outlet
Maintenance
Regular maintenance ensures a long effective life for the tool.
We recommend you make the following checks on a regular
basis.
Warning! Before performing any maintenance on power tools:
Switch off and disconnect the tool from the mains supply.
Oil level
The level in the reservoir should not be allowed to fall below
a quarter full.
After every few hours of use and before storage, remove
the guide bar (4) and the saw chain (5) and clean them
thoroughly.
Make sure that the guard is clean and free from debris.
remove the chain tensioning wheel with a screwdriver and
re-attatch to the opposite side of the guide bar.
Warning! Do not overtighten.
Oil sprocket nose via the sprocket lubriation hole, this
ensure an even distribution of wear around the guide bar
rails.
Saw chain sharpening
If you are to get the best possible performance from the tool it
is important to keep the teeth of the saw chain sharp.
Guidance for this procedure is found on the sharpener pack-
age. For this purpose we recomment the purchase of teh
BLACK+DECKER saw chain sharpening kit (available from
BLACK+DECKER service agents and selected dealers).
Replacing worn out saw chains
Replacement saw chains are available through retailers or
BLACK+DECKER service agents. Always use genuine spare
parts.
Saw chain sharpness
The saw chain cutters will blunt immediately if they touch the
ground or a nail while cutting.
Saw chain tension
Regularly check the saw chain tension.
12
(Original instructions)
Possible solution
Empty oil from tank and
replace
Remove debris from
hole
Remove debris and
clean the chain bar
Remove debris
What to do if your chainsaw needs repair.
Your chainsaw is manufactured in accordance with the rel-
evant safety requirements. Repairs should only be carried out
may result in considerable danger to the user. We recommend
you keep this user manual in a safe place.
Mains plug replacement (U.K. & Ireland only)
Safely dispose of the old plug.
Connect the brown lead to the live terminal in the new
plug.
Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.

Protecting the environment

Separate collection. This product must not be
disposed of with normal household waste.
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
Separate collection of used products and
z
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
BLACK+DECKER provides a facility for the collection and re-
cycling of BLACK+DECKER products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
address indicated in this manual. Alternatively, a list of author-
ised BLACK+DECKER repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com