Samson AirLine Manual Del Usuario página 89

Appendix B: Attaching the Lanyard to the AL1
Lanyard
Clip
3. Place the lanyard over the head of the person using the
transmitter, adjusting the length with the lanyard length adjustment
clasp, which should be at the back of the person's neck (refer to
the illustration above). Insert the lanyard clip into the AL1 tie clasp
until it snaps.
Lanyard Length Adjustment Clasp
Press button to adjust
4. The AL1 should rest approximately in the middle of the chest of
the person speaking (see illustration above). To increase signal to
the mic, adjust the AL1 closer to the person's mouth using the
lanyard length adjustment clasp. To temporarily remove the
lanyard from the AL1, squeeze the clasp and release the clip.
87
Samson AirLine