USRobotics 5464 Guía Breve De Instalación página 14

English
2. Click and continue to follow the on-screen instructions to complete the Setup
Next
Wizard.
If you have already closed the Setup Wizard:
1. Start a Web browser.
2. In the location or address line of your Web browser, type
the router configuration pages.
3. Click the
Internet
"
Select your Internet connection type: either
or
or other DSL modem (also known as PPPoE)
you ISP.
4. When you are finished, click
I am no longer able to access the Internet.
S o l u t i o n 1 :
1. Reboot your DSL or Cable modem. Wait for the modem to completely reboot.
2. Press the
Reset
Wait for the router to completely reboot.
Pressing and holding the
N o t e :
the factory default.
3. Reboot your computer. Wait for the computer to completely reboot and try to access
the Internet.
4. If you still cannot access the Internet, see the Troubleshooting section of the User Guide
on the USRobotics Installation CD-ROM for extended troubleshooting on this issue.
S o l u t i o n 2 :
If your ISP assigned you a Static IP address, make sure that you have the correct IP
address, Subnet Mask, Default Gateway and DNS Servers from your ISP entered in the
page.
Internet
SecureEasySetup could not configure my wireless client.
Solution:
Press the SecureEasySetup button on the back of the router for one full second, then ver-
ify that the SecureEasySetup LED on the front of the router starts blinking before initiat-
ing SecureEasySetup in the client utility for your wireless adapter.
My router's configuration pages are not responding, but I can still
access the Internet.
Solution:
Press the button on the router for 1 second to reboot the router. If you are still una-
Reset
ble to communicate with the router configuration pages, press in and hold the
ton for 7 seconds. This will reset the router to the factory default settings. If you made any
personal configuration settings, you will need to make the changes again or restore your
settings if you created a backup file.
10
tab.
. You should now be able to access the Internet.
Save
button on the back of your router for 1 second to reboot your router.
Reset
Cable, DSL router, satellite, ISDN, LAN,
and any information required by
button for 7 seconds will restore your router to
to access
192.168.2.1
Reset
but-