Programming Example - Favero Electronics SPEAKER TIMER Manual De Instalacion Y Uso

5.2. Specific parameters
To access programming functions:
press [TIMER] several times until the desired "speaking time" is displayed ("t1", "t2", ...,
•
"t9"), and then
• press [PROG] within 3 seconds.
Each parameter being modified is identified by a light switched on.
Speaking time Light
t1 green
yellow
red
t2 green
yellow
red
t9 green
yellow
red
Press [PROG] or [ON-OFF] again to quit the programming mode.

5.3. Programming example

You wish to program the third "speaking time" in the following way:
• backward count;
• sound with maximum volume;
• maximum duration of the speech 15 minutes;
• warning for time available before expiry at 5 minutes and 30 seconds;
• counting continuing after expiry.
Proceed as follows:
general parameters
1. Press [PROG] to access the general parameters setup. ST displays the parameter "H1"
(counting mode) and its current value: use [+] and [-] to set the parameter to "dn".
2. Use the arrow key [>] to scroll the parameters up to "H3" (volume) and set it to "3".
3. Exit setup with [PROG].
specific parameters
4. Press [TIMER] various times until "t3" is displayed; then press [PROG] to access the
"speaking time" specific parameters.
5. ST displays the total time (green light): take the value to "15:00", then pass to the
following parameter.
6. Set the warning time (yellow light) to " 5:30" and then set the mode (red light) to "2".
7. Exit the setup with [PROG].
FAV E RO E L EC T RO NIC S
Specific parameter
Description
Total time.
Time before expiry warning.
Operating mode at expiry.
Total time.
Time before expiry warning.
Operating mode at expiry.
Total time.
Time before expiry warning.
Operating mode at expiry.
- 151029 - 00154-M01-ML - Speaker Timer User Manual Rev01
...
ENGLISH
Value
min default max
0:00 10:00 99:50
0:00 1:00 99:50
0 0 2
0:00 20:00 99:50
0:00 2:00 99:50
0 0 2
0:00 90:00 99:50
0:00 9:00 99:50
0 0 2
9
/ 44