The Product; Pro Link Basic - THERMEx PRO LINK I Manual De Instrucciones

M 536991500911122018

THE PRODUCT

Pro Link is the solution for balancing the air change in your kitchen, even when you turn on your cooker hood. Pro Link is available in three differ-
ent packages for covering the majority of your needs:
•

Pro Link Basic

• Pro Link Premium
• Pro Link Plasma
The options available in the different packages and how they are installed will be described in the following sections.
PRO LINK BASIC
Pro Link Basic consists of a transmitter and receiver for wireless communication. This eliminates the need to run cables between the hood and
the ventilation system.
The Pro Link Basic receiver contains two potential-free contacts with a normally open or normally closed function, thus allowing the volume of
air that is blown in from the ventilation system to increase when the hood is activated. This means that the volume of air in low energy houses,
apartments with independent ventilation systems or smaller central ventilation systems can be balanced even when the hood is in use.
NOTE: Always follow the instructions of the manufacturer of the ventilation system when connecting the Pro Link Basic.
TRANSMITTER
The transmitter is mounted between the power supply and the hood.
1 2
RECEIVER
The receiver is mounted near by the ventilation system.
NOTE: Always follow the instructions of the manufacturer of the ventilation system when connecting the Pro Link Basic.
1 2 3
3 4
4 5 6
5 6 7
7 8
THERMEX PRO LINK I
1. Dip switch
2. LED - Power
3. LED - Set point
4. Button for connection
5. Button for set point
6. 230 V output
7. 230 V input
8. Fuse
8
1. Dip switch
2. LED
3. Button for connection
4. Fuse
5. 230 V in
6. Connection of the valve motor
7. Relay 2
8. Relay 1
57